New range · 10 kA breaking · C-curve · 1P – 4P · 10 – 63 A · ready stock in Nagpur
Aptis+ is Hager's newly launched MCB range, a residential and light-commercial line that carries a 10 kA breaking capacity as standard. That is real fault-current headroom in a range designed for homes, apartments, small offices and retail circuits, where it gives the consumer unit margin against the available fault current near the building's incoming supply.
When Hager introduced the Aptis+ MCB range, Shreetuvis was the channel partner it appointed to carry it in the Vidarbha region. We hold the range in Nagpur across the pole configurations and ratings a residential or small-commercial distribution board actually draws on, single-pole for phase circuits through four-pole for three-phase-plus-neutral incomers.
Aptis+ keeps the specification simple for the circuits it is built for: a single 10 kA breaking capacity and a single C characteristic curve across the range, leaving only the current rating and pole configuration to pick per circuit.
The fault current the MCB can interrupt cleanly. Aptis+ carries 10 kA across the range, fault-current headroom for residential and light-commercial boards, including positions close to the incoming supply where the available fault level is higher.
C-curve trips between 5 and 10 times rated current, the right headroom for the mild inrush of fans, lights, ACs, geysers and small motors found on a typical home or shop circuit, without nuisance tripping at switch-on.
10 A and 16 A for lighting and socket circuits, 20 A for higher socket loads, 32 A for geyser and AC circuits, 40 A and 63 A for sub-distribution feeders and incomers on a residential board.
Single-pole for residential phase circuits, double-pole for line-and-neutral switching, triple-pole for three-phase loads, four-pole for three-phase-plus-neutral incoming MCBs.
Certified to IS 8828 (the Indian Standard for MCBs in household and similar installations) and its international equivalent IEC 60898-1. Every unit carries the Bureau of Indian Standards mark.
Apartment and bungalow consumer units, builder roll-outs across serial flats, small offices, retail and shop fit-outs, anywhere a residential or light-commercial board wants a dependable, BIS-marked MCB with 10 kA headroom.
The Aptis+ MCBs we carry in Nagpur, by pole configuration. Breaking capacity is 10 kA and the curve is C across the range, so a circuit is specified simply by its current rating and pole count.
| Pole | Ratings available | Typical circuit |
|---|---|---|
| Single pole (1P) | 10 · 16 · 20 · 32 A | Lighting and socket circuits, residential phase circuits. |
| Double pole (2P) | 32 · 40 A | Line-and-neutral switching, geyser, AC and small single-phase mains. |
| Triple pole (3P) | 32 · 40 A | Three-phase loads and sub-distribution feeders. |
| Four pole (4P) | 32 · 40 · 63 A | Three-phase-plus-neutral incoming MCBs and mains. |
All Aptis+ MCBs above are 10 kA, C-curve. This is the launch selection held in Nagpur, the wider Aptis+ ratings ladder can be brought in to order through the authorised channel.
Browse the Aptis+ MCB range with prices →
Aptis+ sits alongside the broader Hager MCB line and the RCCB, RCBO and distribution-board families. On a residential board, Aptis+ MCBs pair naturally with a Hager RCCB at the incomer for earth-leakage protection, inside a Hager consumer unit. The MCB rating follows the cable it protects, not the load beyond it, a point worth fixing at the design stage.
Shreetuvis is the channel partner Hager appointed to carry its new Aptis+ MCB range in the Vidarbha region, genuine product, direct from Hager India's authorised channel, held in Nagpur across the residential rating ladder. Project-rate pricing for builder and contractor volumes, with stock visibility before commitment. The full Hager India catalogue and selection tables are available through the authorised channel, see hager.co.in/downloads.
Send the consumer-unit schedule, or just the ratings and pole configurations you need. We'll come back with stock, lead time, and project-rate pricing for builder and contractor volumes. From a single 16 A MCB to a serial-flat roll-out.
