Servo voltage stabilisers · stocked and supplied in Nagpur and Vidarbha
Servo voltage stabilisers sit between the supply and the load, sensing input variation and trimming it to a tight output band before it reaches the equipment. KRYKARD by Atandra is the brand we put behind voltage-sensitive loads in Vidarbha: medical imaging, jewellery showroom lighting, premium retail, IT racks, sensitive lab equipment.
Shreetuvis is an Authorised Dealer for the Atandra KRYKARD range in Nagpur. We'll size and supply from stock, and route deeper integration questions to Atandra's tech team when a particular load profile warrants it.
Two cooling families: oil-cooled for larger continuous loads and outdoor installation, air-cooled for indoor commercial and lighter loads. Within each, single-phase and three-phase variants across a wide kVA range.
Transformer-oil cooled servo stabilisers, for higher continuous kVA, harsh ambient temperature, and outdoor installation. The choice for industrial loads and large showroom incomers.
Naturally air-cooled servo stabilisers for compact, indoor, lower-kVA applications. Suits commercial spaces, premium retail outlets, smaller jewellery showrooms and clinic-scale healthcare.
For residential, small office and small-retail loads, typically 1 kVA to 15 kVA range. Compact, wall-mount or floor units sized for a domestic main board.
For commercial and industrial loads, typically 10 kVA upwards. Balanced three-phase regulation, with optional unbalanced-load variants for buildings with skewed phase loading.
Wide input voltage window with tight output regulation, typically ±1 % accuracy. Built-in surge and overload protection, low-voltage cut-off, manual bypass.
Medical imaging suites, jewellery and luxury retail (where lighting CRI matters), IT server rooms, sensitive laboratory equipment, premium hospitality, broadcast studios.
In Nagpur and Vidarbha, grid supply varies across the day: voltage drops at peak load, overshoots after grid-fault clearance, and dips and surges that no inverter alone trims out. Most loads tolerate it. Some don't: medical imaging, showroom lighting that must hold CRI, IT racks, precision-machining steppers, sensitive lab equipment.
A KRYKARD servo stabiliser sits upstream of the sensitive distribution and presents a clean, tightly-regulated voltage to whatever is downstream, keeping the protected equipment inside its rated input window throughout the day.
Authorised Dealer for the Atandra KRYKARD range, direct manufacturer sourcing, genuine units, OEM technical support for sizing and integration. Project-rate pricing for contractor and builder volumes. KRYKARD's tech team is one phone call away when a load profile needs a closer read than the catalogue answers.
A KRYKARD unit, correctly sized for the load profile and properly integrated, lasts as long as the equipment it protects. Sizing is the part to get right at the order stage: undersized stabilisers run hot and short-lived, oversized ones waste headroom. We size off the equipment list against KRYKARD's selection tables before the unit ships.
Shreetuvis Technologies is an Authorised Dealer for the Atandra KRYKARD range, direct manufacturer pricing, genuine units, and access to OEM technical support for sizing and integration.
Send the equipment list and we'll come back with a sized KRYKARD recommendation (cooling type, kVA, phase) and project-rate pricing for contractor and builder volumes.
