Electrical earthing equipment · for safe installations in Nagpur and Central India
A good earthing system is what lets the rest of the protection work. Every protective device (the MCB in the DB, the RCCB on the bedroom circuit, the lightning conductor on the roof) depends on a competent earthing system to clear a fault the way it was designed to.
Shreetuvis is an Authorised Dealer for Excel Earthings: maintenance-free chemical earth electrodes, GI strips, backfill compounds and the accessory components that finish a compliant earthing installation per IS 3043.
Earthing system components: the electrode that sinks the fault current into the soil, the conductor that gets it there from the panel, the backfill that maintains soil resistivity, and the accessories that hold it all together. We carry the full range.
Steel-cored, copper-bonded earthing rods, the high-strength alternative to pure copper. Drives into hard soil without bending, with the conductivity profile of copper at the surface.
Maintenance-free pipe-in-pipe earthing electrodes with internal chemical compound, designed for long-term low earth resistance even in dry seasons. The modern specification.
Galvanised iron earth strips for the main earth grid, plus GI earthing wires for sub-distribution. Standard sizes for residential, commercial and industrial installations.
Conductive backfill compound for earth pits, keeps soil resistivity stable through seasonal moisture variation. Critical for low long-term earth resistance.
Earth pit cover with watering pipe and inspection lid, earth-bus bar plates, lug clamps, U-bolt couplings and threaded couplers for rod extension: the small parts that finish the install.
Excel Earthings products are designed to comply with Indian Standard IS 3043 (Code of Practice for Earthing), the standard the consulting electrical engineer signs against on the as-built drawings.
Every protective device in a panel (every MCB, every RCCB) works by routing fault current to earth. The earth electrode is what gives that current somewhere to go. A well-sized, well-installed earthing system is what lets the MCB trip cleanly and the RCCB sense leakage in time.
Get earthing right at the foundation stage (when the pits are easy and the soil resistivity is measurable on a clean site) and the rest of the panel does its job for the lifetime of the installation.
Authorised Dealer for the Excel Earthings range, direct manufacturer sourcing, genuine electrodes and accessories, OEM technical resources for soil-resistivity calculations and electrode sizing. Project-rate pricing for contractor and builder volumes. Excel's tech team is one call away when a site soil profile needs a sized electrode count or a backfill recommendation.
Earthing is the foundation under every electrical protection device. If you're building, we recommend an Excel Earthings system at the foundation stage, when the pits are easy. If you're retrofitting, we audit first, then specify. Either way, the earth-resistance reading at handover is the number that says the work was done right.
Shreetuvis Technologies is an Authorised Dealer for the Excel Earthings range, direct manufacturer pricing, genuine product, and access to OEM technical resources for soil-resistivity calculations and electrode sizing.
Tell us the site, the soil, and the load. We'll come back with a sized earthing BoQ from the Excel Earthings range and project-rate pricing for contractor and builder volumes.
